november 2021
october 2021
september 2021
august 2021
july 2021
june 2021
may 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
november 2019
october 2019
august 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


The main problems concerning pressure regulators
When considering pressure regulators, it is often thought that downstream of the component there are no risks deriving from any malfunctioning of the component itself. However, this is not completely true. In fact, the components designed by Gnali Bocia are guaranteed over time and in specific [...]

The characteristics of stainless steel hoses
With regard to stainless steel, the world of metallurgy has separated this type of steel into several classes based on the alloy elements and the microstructure. The stainless steel hoses produced by Gnali Bocia are marked ‘GNALIFLEX’. They are made from AISI 316 stainless steel: this is an [...]

Gnali Bocia Hydraulic fittings are exported worldwide
The quality of the Gnali Bocia product range is the result of careful and close supervision activity that starts as early as the hydraulic fitting design phase. The Gnali Bocia Research & Development Department is a team of experts that constantly apply the know-how acquired over the years so as [...]

The relief system in gas safety valves
The gas management systems are designed to maximise the efficiency of the plant in normal operating conditions or when at a standstill: it is always best to work at constant operating conditions as much as possible and this can be guaranteed by components such as gas safety valves. There are two [...]

Safety guaranteed by Gnali Bocia gas taps
Strict standards are in place to ensure safety to all people close to possible dangerous sources such as LPG, methane and other gases. The standards must guarantee that the prevention and protection measures are sufficient to avoid any accident by drastically lowering the risk threshold. In [...]

Series of requirements for hydraulic valves
To ensure the safe use of the hydraulic valves, the engineers of Gnali Bocia, a leading company in the sector of connecting elements, have to meet the design demands of the components to be sized. The process starts with selection of materials, which already implies a first selection of the [...]

Thread requirements on water manifolds
To guarantee uniformity among products from different manufacturers, Gnali Bocia adopts a series of standards that define, as well as the essential safety and environment requirements, also the dimensions and tolerances required. One category that envisages the use of standards is that of [...]

Gas outflow from high pressure reducers
High pressure reducers are made of brass, offering high resistance and sealing efficiency in consideration of the maximum pressures acting inside this component. Brass guarantees optimal load resistance in high pressure reducers and in combination with safety systems for the release of excess [...]

Pressure management in mini control units
LPG systems are now used on a great number of ‘green’ cars, as they fuel the engine throughout journeys, reducing CO2 emissions and other gases generated from combustion of petrol. In order to manage the LPG system, a number of primary and secondary components are used, designed to manage [...]

Brass fittings from Gnali Bocia
Brass is an alloy of Zinc and Copper, frequently used for fittings destined for the hydraulic industry. Products designed and marketed by Gnali Bocia include both components for LPG and other gases, and components for use with incompressible fluids. The exclusive feature of Brass fittings lies [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.