june 2022
may 2022
april 2022
march 2022
february 2022
january 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
june 2021
may 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

A controlled process for the production of tubular electric heaters

The assembly of the tubular electric heaters with components manufactured on last generation machines ensures their durability.

The production and assembly of the components manufactured in its own plants enables GNALI BOCIA to supply his clients with a broad personalization level for tubular electric heaters, being versatile components for heating the water in health circuits especially.
The coupling of the annealed copper pipes of the tubular electric heaters is effective thanks to the precision by which the brass is turned and perforated so as to obtain the flanges, being a material which is manufactured on last generation machines capable of ensuring compliance with especially strict tolerances.
When tubular electric heaters are planned and realized, it is necessary to verify that the specific power never exceeds 9 watt/cm2, as that guarantees an optimal distribution of the heat, and especially a reduction of the noisiness caused by the creation of bubbles to the full advantage of home comfort.
In the catalogue, we find a wide range of these tubular electric heaters for immediate supply, which are able to adapt to all the applications, even those in which resistance to corrosion is tested severely, since it is in fact always possible to foresee the assembly of magnesium sacrificial anodes so as to alleviate that problem.
A helping hand to the perfect realization of these components comes moreover from the quality management system based on the dictates of the ISO9001-2008 table.




See also
19/01/2016 Electric tubular heaters capable of offering better resistance to corrosion. Copper at a high purity grade in order to build electric tubular heaters suited to house kettles

19/06/2015 Advices for a good utilization of tubular electric heaters Corrosion and noisiness of tubular electric heaters might be reduced through a few adjustments

19/05/2017 Electric resistors for water heaters and the problem of system corrosion Electric resistors for water heaters made of pure copper to limit the effects of corrosion

19/03/2014 Home comforts with tubular heating elements Tubular heating elements have many advantages due to their versatility and usability in heating fluids for domestic use

19/03/2017 The importance of the specific power of electric resistances Electric resistances made of pure copper to reduce the effects of corrosion and increase duration over time.

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.