ARCHIVE
january 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
june 2021
may 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
november 2019
october 2019
august 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Valves for gas meters for management bodies of gas networks

The valves for gas meters with coded key safety lock to reduce unauthorized delinquencies and withdrawals

In gas systems, the main point is the connection of the plant to the distribution network and all have to pass through the gas meter, the main means of consumption accounting. Its assembly is made using a bracket to which the valves for gas meters must be connected, produced by GNALI BOCIA as a natural complement to its line of products for gas.
These valves for gas meters are made with ball lock, a simple but reliable system over time, able to ensure always a perfect closure. This is fundamental for the safety of people. In fact it is useful to install two of these devices one downstream and one upstream of the meter.
In the first case a normal shut-off valve must be installed, made of brass on transfer machines that guarantee precise processing that guarantees perfect seals in all conditions.
But upstream of the gas meter the distribution management bodies require the installation of valves for gas meters equipped with a mechanism which, in the event of termination or delay, allows to block the gas supply. This mechanism with a special key in possession of the manager can be blocked without the possibility of opening. There is also a second key in possession of the user who can close and reopen the mechanism in case of absence from home.

27/09/2018


See also
27/11/2014 Key-locked meter valves The law prescribes that meter valves should also be equipped with a security key.

27/01/2015 Which are the standards for meter valves? The documentation with the meter valves as prescribed by regulations.

27/03/2020 Shelves for gas meters: available positions

27/11/2021 Safety valves for gas blocking The characteristics of the gas block valves, safety first.

27/07/2018 Gas valves with ball lock Gas valves made in two pieces for the interception of gaseous fluids in plants.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.