ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The correct choice of a pressure reducer for water

Two useful graphics for the choice of the right pressure reducer for water in respect of a domestic installation

On the GNALI BOCIA catalogue we find a section dedicated to the plywood pressure reducer for water, a useful device to keep the pressure in the installation even in the event of significant changes in pressure at source, usually due to the fluctuations in demand on the part of the various connected users. We might therefore discover that the inlet pressure on our installation might increase from day to night from 3 to 5 bars, at the expense of such delicate devices as the boiler.
In choosing the aptest pressure reducer for water for our application, we might utilize the two graphics set out at the beginning of the specific chapter. In one of them, the flow rate is linked to the flow speed, on account of the diameter of the pipeline and thus of the device, whereas in the other one the pressure drop is linked to the payload, again on account of the dimensions. On the basis of the system data, and with the help of the tables set out herein, we can accordingly choose the suitable pressure reducer for water.
The construction of the pressure reducer for water is done from the starting premise of raw materials forged in CW617N stamping brass, which are then wrought at the Lumezzane plants on last generation numerical control machines, so as to ensure precision and product durability. The operating temperature can normally reach up to 80°C, but in respect of the internal seals in the Viton version they might reach an operating temperature of 130° C.
 

30/04/2015


See also
30/02/2018 Water pressure reducer "mignon" series For installation in narrow spaces we use a water pressure reducer of the "mignon" series

30/12/2018 Cavitation in water pressure reducers Prevent cavitation phenomena that could damage water pressure reducers

30/02/2017 Pressure reducers for high pressure gas Pressure reducers with a brass or zamak body and pressure adjustment screw

30/10/2016 The stabilization of the inlet by means of a water pressure reducer valve Water pressure reducer valve, by means of the compensation principle, regulates the pressure output in a precise manner.

30/09/2017 A pressure reducer for every need The pressure reducer is a device used for water, gas and methane


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.