ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Pressure reducers for high pressure gas

Pressure reducers with a brass or zamak body and pressure adjustment screw

A specific section of the GNALI BOCIA gas catalogue is dedicated to pressure reducers, devices that lower those high pressure values found, in particular, in tanks where the internal pressure is particularly high and cannot be handled by a normal regulator.
Made with a brass or zamak body and internal membranes of elastomer that is compatible with the most commonly used gases being marketed, our pressure reducers are available in the most varied range of configurations. Their main characteristic is the adjustment device which, manually and according to the input pressure, varies the pressure available at output. There are, however, also fixed setting devices, perfected on our laboratory worktops to guarantee precision and constancy.
The choice of the most suitable pressure reducer, however, also depends on the flow rate that it can deal with. The available devices can reach a maximum flow rate of 40 kg/h of fluid.
According to installation requirements, there are also pressure reducers which, through a lock valve, can interrupt the flow if the hose detaches accidentally.
 

16/02/2017


See also
16/12/2018 Cavitation in water pressure reducers Prevent cavitation phenomena that could damage water pressure reducers

16/09/2017 A pressure reducer for every need The pressure reducer is a device used for water, gas and methane

16/03/2016 Protecting hot water heaters through pressure reducers for water Pressure reducers for water in normal or compact versions for a variety of maximum peak usage pressures

16/09/2018 Choosing the right pressure regulators in kit The wide range in which you can choose the pressure regulators more suitable for your needs to be included in our kits

16/11/2013 Gas outflow from high pressure reducers The reference standards for high pressure reducers guarantee that, in the event of problems, any excess air can be released.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.