ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Mini-control unit to save space

Control unit or mini-control unit, the choice starts from the space actually available

The connection of several tanks to a system can be carried out by means of a control unit or a mini-control unit. Both have from 2 to 4 leads and are equipped on each derivation with a shut-off valve. This valve allows to replace one of the empty tanks without stopping the flow of gas to the plant.
Despite this, the relevant legislation states that any derivation on a mini-control unit can not be left free, that means without any connected cylinders, even if the junction tap is closed. This is to make a gas leak less likely in the absence of a perfect closing of the tap itself.
As for the control units, each mini-control unit is fitted at the outlet with a pressure reducer, to make the gas pressure compatible with the burners of household appliances and gas cookers. There is also the possibility to monitor the contents of the gas cylinders through the use of a pressure gauge mounted on the body of the control unit.
The use of the mini-control unit is typical of the mobile home and camper sector, due to its reduced size. To facilitate assembly, they can be supplied complete with fixing bracket and hoses.

17/01/2019


See also
17/11/2013 Pressure management in mini control units The mini control units control pressure from upstream to downstream of the components so as to ensure correct operation

17/07/2021 Mini-control units: the UNI-7131 standard What does the UNI-7131 standard say regarding the mini control units, an essential connection for gas?

17/10/2018 Fixing of mini-power packs for safety Mini-power packs equipped with bracket obtained in the unit or refitted in steel for a correct fastening

17/07/2015 Mini control units; UNI 7131 guidelines The UNI 7131 regulation provides guidelines for the installation and usage of the mini control units for the fuelling of implants with LPG tanks

17/02/2014 General description of the mini control units Mini control units manage the pressure input / output from the collector, allowing nominal operation of the device


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.