ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Fixing of mini-power packs for safety

Mini-power packs equipped with bracket obtained in the unit or refitted in steel for a correct fastening

To simplify their use and also to make life easier for the non-professional user, the mini-power packs manufactured and marketed with the fixing brackets already prepared. These can be obtained directly in the brass unit that characterizes these articles, or in pressed and galvanized steel.
This type of fixing allows to install the mini-power packs in every position and above all in the safest way. We are thinking about the use of these devices especially on campers for example, where a stable fixing is essential for the safety of people traveling on the vehicle.
In fact, these mini-power packs must be able to be connected to more than one tank at the same time and ensure optimal control of the pressure to be sent to users. This is why one of the component parts of these items is the one- or two-stage pressure regulator that at all times ensures the right pressure for the burners.
The mini-power packs can have up to three derivations, each with its own shut-off valve, this to allow the change of the tank when it is empty. It must be remembered that for safety reasons, as required by the regulations, to each derivation must be connected a tank also with shut-off valves.

18/10/2018


See also
18/03/2018 Mini power-packs fundamental components for a compact system Use of mini power-packs saves space without compromising safety

18/05/2016 Mini power packs realized in brass and used to connect more than one tank. Mini power packs with two or three shunts to which more than one tank may be connected, equipped with a pressure reducer.

18/08/2016 Mini power packs, the compact solution for connecting tanks Mini power packs equipped with pressure gauge and unidirectional valve for an easier replacement of tanks

18/12/2017 Mini power packs with one or two stage reducers Mini power packs with double stage reducer that allow to reduce even high pressure in an optimal way

18/03/2017 Mini power packs make compactness their strong point Compact mini power packs, above all the Y version which combines a maximum of three inputs with a compact design.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.