ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

LPG pipe in PVC or rubber, depending on the application

LPG pipe in the rubber version that can also be used for industrial welding equipment

There are two main types of LPG pipe available in the catalog and both are sold in rolls that allow the cutting of the most suitable piece to use.

In the first case we have a LPG pipe made of a  PVC-based material, a versatile and flexible material, which replaces the rubber in healthy environments such as homes, where the risks of pipe abrasion are much lower. It is made according to the UNI 7140 standard to connect users of reduced power. Sold in rolls of 10, 50, 100 meters and it is a pipe that according to the reference legislation cannot connect devices more than 2 meters distant from the gas intake point. The inside diameter in one case and in the other is always 8 mm for mounting on the dedicated hose holders.
In the second case instead the standard EN ISO 3821 (EX EN 559) provides a LPG pipe with an increased outer diameter and the use for the construction of NBR and EPDM rubber which makes it more resistant to abrasions and crushing. The use of this particular type of LPG pipe is also allowed in industrial equipment such as welding systems, this is also due to the fact that the reference standard does not limit the length of use.


15/11/2018


See also
15/09/2016 Methane gas pipe in rolls complying with the UNI CIG 7140 standard Methane gas pipe in rolls to be cut to size while always abiding by the chunk lengths dictated by the standard

15/02/2020 Hose for LPG realized according to the EN ISO 3821 standard Characteristics of the hose for LPG laid down by the ISO 3821 standard relating to welding equipment

15/12/2015 Pipe for methane gas and the reference norm A multi-layer PVC pipe for methane gas with an intermediate layer in woven material for the sake of improving resistance to pressure.

15/03/2016 Materials and labelling of methane gas pipes Labelling repeated on methane gas pipes at regular intervals for the sake of a correct identification.

15/02/2018 Stainless steel flexible pipes with plastic protective sheath Stainless steel flexible pipes meet the UNI CIG 9891 standards which provide the external protection in plastic polymer


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.