ARCHIVE
august 2019
july 2019
june 2019
may 2019
april 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Many lpg systems use gastaps

It is necessary to have systems that use adequate lpg gastaps tp control the fuel load.

In a society interested in the safety of  people and operators that work in close contact with  unfavourable conditions, an extra possibility to guarantee higher levels of protection is given by gastaps. These components are developed in the Research and Development sector of Gnali Bocia, after which they are tested and produced by the same firm. The next step is entrusting the product to the sales network that deals with supplying big sales centres worldwide.
Gastaps are made of Brass, a Copper Zinc alloy much used in the hydraulic sector, not only for the production of taps but for connectors in general, for high and low pressure regulators, for safety accessories like valves etc. Gastaps utilize Brass for the variety of properties it holds: from a good mechanic resistance to corrosion resistance in difficult environments. Using “good materials” for the production of hydraulic fittings like gastaps is not sufficient guarantee for the customer, continuously needing more reliable components: for this, specific standards are used to give a stronger guarantee.
In order to satisfy the many requirements from clients, Gnali Bocia design and market a variety of taps such as Needle, Cone-shaped, for tanks, for cartridge systems and taps for welders with burners.   
 

25/09/2013


See also
25/03/2013 Hydraulic fittings and their usage in various sectors of interest Through the hydraulic fittings water flow is transported from one zone to another, thus reaching the required supply point

25/01/2013 The various types of taps for gas produced The designing, testing and sale of Gnali Bocia gas taps

25/12/2013 Safety guaranteed by Gnali Bocia gas taps Gas flows inside these taps so maximum safety must be guaranteed in order to prevent dangerous accidents.

25/01/2014 Gnali Bocia Hydraulic fittings are exported worldwide The hydraulic fittings are sold all over the world and Gnali Bocia manages the entire sales process, guaranteeing maximum quality and respect of standards and regulations

25/11/2016 Hose connector for gas taps Gas taps can have different types of certification, according to the sector they are used in.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.