ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Water pressure reducers that save water
As already said other times, applying water pressure reducers upstream of a system above all helps reduce the dangerous effects that pressure peaks can cause to user devices, or on shut off valves with their resulting breakage and the consequential loss of fluid. Applying water pressure [...]
08/12/2016

Avoid plant stoppage by using an air release valve
Hard water with large amounts of dissolved minerals and salts can cause the formation of gas bubbles inside the system. These bubbles can be effectively managed by an air release valve installed it a suitable point in the system. Gas expansion can, in fact, stop the fluid from discharging [...]
01/12/2016

Pipe fittings produced by GNALI BOCIA
Pipe fittings made of brass, which are also called generic, can be used to connect the various components of a hydraulic system or any system that transports fluids. Indeed, the difference between these articles lies, as in the case of those produced by GNALI BOCIA, in the processing technology [...]
24/11/2016

Hose connector for gas taps
Different types for different uses make our gas taps articles which, thanks to the wideness of their range, can truly satisfy a whole variety of very different demands. There are, in fact, needle valves for adjusting cooking ovens, or those suitable for use with camping gas canisters, and each [...]
17/11/2016

Mini power packs for installation on mobile means
As said before, mini power packs are compact devices for connecting several bottles to the same system. This is useful for installations where space optimisation is an unavoidable necessity, for example in camper vans, caravans, boats, but also for fixed or temporary installations such as [...]
03/11/2016

The galvanic treatment of brass manifolds
They are born in two, three or four shunts to enable interconnection and thus create the necessary number for system requirements: these are the brass manifolds, a versatile article we may come across in the catalogue of the GNALI BOCIA company. In their chromium- or nickel-plated versions, or [...]
27/10/2016

A safety valve avoids blocks in the system
Automatic or manual, a safety valve always aims at discharging the excess gas that might gather in the critical points of a system, be they curves or maximum pipe points or radiators. This gas dissolved and released by the fluid that conducts heat inevitably tends to create noise, besides [...]
20/10/2016

Products for heating and plumbing that come in contact with the combustible gases
Year after year, the market for heating and plumbing products is becoming more demanding to the point that clients expect more, in the face of non-excessive prices, regarding an increasingly high quality and a high degree of innovation to keep pace with the times. But above all, as in the case of [...]
13/10/2016

The stabilization of the inlet by means of a water pressure reducer valve
With the advent of plastic pipes for the aqueduct distribution networks, you can begin to notice the first ruptures after a number of years. This is caused by the combination of two factors: the type of pipe material, which tends to undergo the phenomena of relaxation and pressure fluctuations, [...]
06/10/2016

Flexible metal pipes of our catalogue
For a safe connection of user equipment both to the water supply and to the methane gas, we may use a wide range of flexible metal pipes available in the GNALI BOCIA catalogue. The advantage of their use is the fact of having a continuous wall that ensures a better connection [...]
29/09/2016

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.