ARCHIVE
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Which are the standards for meter valves?

The documentation with the meter valves as prescribed by regulations.

For connections to the distribution network and to the meter it is necessary to use meter valves which guarantee the interception of the fuel fluid and the isolation of the system from the network.
Made with a closing ball, these meter valves conform to EN331 which defines all criteria for designing and testing these articles. Not only, the standard also defines the marking and minimal instructions to be provided for their installation and usage.
The minimum data which must be reported on the meter valves consists of: the mark or the name of the manufacturer, the nominal DN size, the class of maximum operating pressure also called MOP, if necessary the direction of flow that must pass through the valve must also be indicated and finally, at least the year of production, which can also be written using a conventional code.
Meter valves must also be accompanied, according to law, by a booklet written in the language of the country where they will be sold and which shows the important information concerning: how to install the product, its use and any operating maintenance required during its useful life, if necessary the installation position for a proper use must also be reported, and last but not least its maximum and minimum temperatures of use and above all its maximum pressure of use.
 

29/01/2015


See also
29/11/2014 Key-locked meter valves The law prescribes that meter valves should also be equipped with a security key.

29/10/2014 Marking non-extensible stainless steel flexible tubes. EN14800 legislation indicates how stainless steel flexible tubes should be marked.

29/03/2015 Data and certificates in support of a shut-off valve The shut-off valve is identified by the lead tag of the inspector at the time of testing

29/01/2018 Ball gas valves for the interception Gas valves made of nickel-plated brass for durability and reliability over time.

29/02/2015 Pressure regulators for industrial uses Adjust the inlet pressure through the FG and FGB ranges of pressure regulators


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.