ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Tubular heating elements and copper corrosion

With hard or chlorinated water the tubular heating elements can be protected with a magnesium anode

The company Gnali Bocia srl produces tubular heating elements that can be used in water heaters and boilers both open and pressurized.
The range available in the catalogue covers a wide variety of needs with heating powers ranging from 1000 to 3000 watts, normally functioning with 220 Volt single-phase power supply. However it is possible to have tubular heating elements which also function at 110 and 240 volts, standards different from the Italian ones.
For the connection of the power Faston Standard Female connectors are outlined to guarantee the universality and an optional connection for the magnesium anode protection can also be provided for the tubular heating elements.
This device is used in environments which are particularly capable of causing corrosion and wear on the heating elements. The products are always made with the best materials but despite this in order to prolong their life sometimes it is necessary to use this method for the protection of the tubular heating elements.
The temperature reached by the fluid during the heating is high, especially with water containing high quantities of minerals and therefore particularly hard, or on devices that treat water with large quantities of chlorine. In these cases the corrosion is shifted by inserting a sacrificial anode which corrodes instead of the copper.
In more complicated cases tubular heating elements made from stainless steel can also be used.
 

11/06/2014


See also
11/03/2014 Home comforts with tubular heating elements Tubular heating elements have many advantages due to their versatility and usability in heating fluids for domestic use

11/03/2016 Limiting corrosion in tubular electrical heating systems Tubular electrical heating systems increase their life span if the hardness of the water in the installation is checked.

11/06/2015 Advices for a good utilization of tubular electric heaters Corrosion and noisiness of tubular electric heaters might be reduced through a few adjustments

11/12/2019 The range of tubular heating elements According to practical needs, Gnali Bocia has equipped its catalog with a decisive choice of tubular electric resistances Gnali Bocia offers a number of types of tubular electric resistances

11/05/2016 Parts for tubular electrical heating systems Tubular electrical heating systems manufactured from the premise of a brass-processed cap onto which the copper pipes may be fastened


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.