ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The installation maintenance and the boiler safety valve

Limiting the limy deposits improves the boiler safety valve's life, as well as the one of the system.

In a heating system with thermic generator, or in any kind of close-circuit installation, a device that guarantees the safety of people as well as the one of the system itself, is certainly the boiler safety valve.
Prime quality materials such as the CW617N brass and the anti-sticking rubber, render the boiler safety valve reliable over time, but not entirely immune to problems that may arise due to the system’s age.
Indeed the deposits and encrustation that may occur over the internal surfaces of the tubes, by disjoining, could begin to move around the circuit and even reach the boiler safety valve, thus depositing onto the tightness-surfaces and undermine functionality.
Therefore, for the correct action of a boiler safety valve, construction (and, thus, the device’s reliability) isn’t the only requisite; but so is the system’s maintenance itself.
In this case, beyond a periodical cleaning, it is also useful to add a specific additive in order to limit the increase of limy deposits, which are the source of this type of problems.

 

03/09/2015


See also
03/10/2018 Safety valve for boiler with manually opening Safety valve for boiler with brass unit and specific command for its forced opening

03/09/2014 System safety with the boiler safety valve Prevent problems and damages to your system by using a boiler safety valve

03/09/2014 Distinctive features of the fuel shut-off valve Various characteristics ensuring the Gnali Bocia fuel shut-off valve is a safe product

03/09/2016 Safety valve for boiler approved in accordance with the PED directive Safety valve for boiler made in brass on numerical control machines at the Lumezzane plants

03/12/2014 Fail-safe aspects of the fuel shut-off valve Operation and safety of the fuel shut-off valve for burners and boilers


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.