ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The importance of thermostats in boilers

The choice of a thermostat for a boiler is very important for reducing the emission of pollutants and lowering consumption.

A mechanical component must work at nominal conditions that allow continuity over time: for example, a thermostat for boilers must be able to detect the temperature or any variations of it with minimum reading errors so as to allow the boiler to control the flow of heat necessary for heating water or any other working fluid.
It may seem a foolish point to make, but the thermostat contributes to lowering the boiler’s consumption and indirectly also contributes to reducing the emission of the polluting particles responsible for the greenhouse effect and the increase of particulate in the atmosphere, i.e. of all those substances which, suspended in the air, can harm human health.
The optimisation of the production chain is, as explained above, essential to the protection of human health and the environment. This is why Gnali Bocia focuses heavily on the safety of the whole range of its thermostats up until their installation and testing inside the boiler.
Generally, a low consumption boiler with relatively low flow rates is preferred for domestic use so as to avoid any losses and subsequent fluid top ups. A thermostat able to detect the temperature of the fluid in the boiler with high accuracy and able to consequently adjust the functioning of the boiler is therefore essential.

 

02/04/2014


See also
02/02/2015 The right temperature on the boiler thermostat for savings The right room temperature regulated by the boiler thermostat promotes a healthy environment

02/10/2013 Thermostats for hydraulic sysyems Thermostats are inserted in water heaters or boilers to regulate the temperature.

02/09/2015 The installation maintenance and the boiler safety valve Limiting the limy deposits improves the boiler safety valve's life, as well as the one of the system.

02/10/2018 Safety valve for boiler with manually opening Safety valve for boiler with brass unit and specific command for its forced opening

02/05/2013 Heating collectors and principles of use A combination of several heating collectors allows assemble a system of hydraulic management for residential areas


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.