ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Safety provisions of the valves offered by Gnali Bocia

Safety valves are designed to work on contact with hot water accumulation systems for sanitary installations

Over the years, the development of technology enabling the realisation of  highly efficient sanitary installations for the accumulation of water has led to improvements in safety standards. The safety valve in particular is a tool of prime importance introduced for better protection of the health of all those who use water heaters and boilers. The operational principle of the safety valve is based on a spring preloaded in accordance with calibration values ​​decided at the design stage. The spring presses with the preloaded force onto a shutter. The spring stays in position against the shutter until the internal pressure of the conduit reaches a level that causes the shutter to open,  allowing the liquid to flow out and therefore reducing the pressure inside the conduit to normal levels.
The safety valves manufactured by Gnali Bocia also provide and anti-drip function. This is facilitated by a mechanism made up of a gasket, a guide rod and a ring nut that allows the activation of the valve safety unit only for very high liquid pressures, thus avoiding periodic and annoying dripping.
In addition to shape and form, the safety valves are divided according to their capacity to allow manual discharge. Safety valves of this type are used in environments where anyone can be authorised to manage the valve. In environments where it is necessary that any intervention is limited only to the operators the manual discharge functionality is not included.  
 

24/04/2013


See also
24/08/2019 Operation and assembly of the safety valves

24/09/2014 System safety with the boiler safety valve Prevent problems and damages to your system by using a boiler safety valve

24/02/2015 Safety valves are necessary for your own protection Protect your system against damages by using a safety valve to be applied to the output of your generator.

24/11/2014 Installing the safety valve Some criteria for installing the safety valve in the system

24/08/2022 Safety valve and assembly onto the water heater The safety and check valve must be fitted onto the water heater inlet for it to operate correctly


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.