ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Process of nickel plating on the air venting valve

The nickel-plating is used to increase the material hardness and improve other characteristics of the air venting valves. This operation is executed before launching product to the market

In the mechanical industry, almost any component is subjected to one or more heat treatments or surface coating. The purpose of these processes is to bring the properties of a mechanical component at a higher level compared to the crude product obtained in the raw state. One of the typical examples of described operations is the treatment of the air venting valves which are designed and marketed by Gnali Bocia worldwide.
The air venting valves are used to evacuate the excess air inside an industrial plant. It is important to know that the safety valves are equipped with automatic regulation of air-out and this is allowed by a stainless steel spring which, when compressed above a certain threshold, opens the upper tap and allows excess air to escape, reducing the pressure inside the system. In practice, the maximum working pressure that can be sustained by venting valves usually equals to 10 bar.
Note again that the air venting valves are subjected to the nickel plating for the purpose of increasing the hardness and wear resistance. This treatment also increases the adhesion of the coating to the brass substrate of the venting valves and improves anticorrosion characteristics. The last factor is to be taken into account for the environments in which the working atmosphere is not inert and humidity value is considerable.
 

10/07/2013


See also
10/05/2017 Air venting valves and accumulations in systems Air accumulations in systems are caused by many things, but can be eliminated using an air venting valve

10/01/2021 Nickel-plated brass: an excellent choice for multilayer pipe fittings

10/07/2017 Nickel plated threaded brass fittings The nickel plating applied to the threaded brass fittings replaces chrome in those markets where chrome is not permitted

10/10/2013 Materials used to produce air vent valves The brass used for the production of air vent valves contain alloy elements necessary for the correction function of the components.

10/09/2017 Automatic air exhaust valve for plant performance Upstream to the boiler, the air exhaust valve serves to prevent dissolved gas from accumulating


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.