ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Modularity of the brass manifold for heating

Threaded at its ends, the manifold for heating enables the combination of different models for attaining the right number of outputs

Whether we have to realize a radiator system or a floor system, the use of a manifold for heating realized in brass with shut-off cocks is almost a necessity.
The presence of valves on the manifold for heating, in fact, enables the splitting of the flow on every branch plant, thereby allowing a correct balancing and thus an optimal distribution of temperature in the pipes. This is an obligatory regulation, especially in the radiant panel realizations.
We can choose two-, three- or four-way manifolds for heating, and the threads at their ends enable the combination of more than one of them, so as to obtain the number of outputs most suited to the plant requirements. The regulation may be carried out through the screw-down stop valves placed on every branch. As for these valves in the catalogue, we may choose a series of accessories, such as knobs in different colours or labels to identify the various outputs.
Every manifold for heating is produced and tested at the GNALI BOCIA plants, where every operation is carried out according to precise procedures organized in pursuance of the ISO 9001 schemes.
 

10/12/2015


See also
10/01/2017 Heating manifolds, low bulk Heating manifolds made using modern and efficient machines in the Lumezzane headquarters

10/02/2014 The heating of a house is managed by a group of manifolds. Houses need a hydraulic management system which is controlled by heating manifolds

10/03/2021 Heating manifolds with stopcock The adjustable version of heating manifolds useful for correctly balancing installations

10/08/2018 Heating manifolds with passage of 1 Heating manifolds necessary for easy installation of a heat distribution system

10/03/2017 Water manifolds with stopcocks Modular water manifolds made starting from unrefined cw617n brass, and machined using CNC centres


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.