ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Manifolds for water heating systems and stress corrosion.

Manifolds for water heating systems, made from hot forged brass and cooled to homogenise the material

To keep water heating systems safe and long lasting, it is difficult not to think about using manifolds. These very versatile articles are made from brass and, thanks to their modularity, they can satisfy the most varied project requirements.
The use of manifolds for water heating systems means that the utilities can be concentrated in a distinct point. They can be coupled using single pieces of piping, which prevents chased connections in both floors and walls. The possibility of leaks over time therefore becomes remote.
Brass is a material that can cause stress corrosion, resulting in breakage, if it is not forged correctly. This is why GNALI  BOCIA concentrates all its attention on the production cycle, starting from the very first phase. The manifolds for water heating systems, in fact, are forged from top quality alloys, the composition of which is controlled in-depth. The cooling phase, which is the most important one for eliminating stress, is carried out in controlled environments and at a speed that correctly homogenises the material.
The process is controlled by an ISO 9001 quality system.




 

27/04/2017


See also
27/01/2017 Heating manifolds, low bulk Heating manifolds made using modern and efficient machines in the Lumezzane headquarters

27/06/2015 The stress corrosion cracking (SCC) and threaded brass fittings Reducing the effects of stress corrosion cracking (SCC) in the threaded brass fittings, even during their installation.

27/07/2017 Manifolds for sanitary installations with adjustment screw Our manifolds for sanitary installations are made to give plenty of channels for fluid to pass through, resulting in reduced pressure drops.

27/03/2013 The use of water manifolds in heating installations Water manifolds are used in homes for all heated water sorting installations

27/05/2017 Manifolds for water and multilayer pipes Manifolds for water, made of brass that has been worked with machine tools to make your installations modular


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.