ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Manifolds for sanitary facilities: which model should I choose?

Manifolds for sanitary facilities in different models, with or without faucet, yellow or chrome-plated, with the most suitable wheelbase.

The manifolds for sanitary facilities we come across in the GNALI BOCIA catalogue may be made in different ways, but mainly speaking we should consider two construction types, the one with an adjustment valve on each output and the simple linear type.
With the former, we may use the faucet installed on the manifolds for sanitary facilities as a shut-off valve facilitating the maintenance or closure of a single user, which is quite useful to avoid leaving an entire house without water when problems arise.
Instead, the version manifolds for sanitary facilities of a linear time lacks this option, but has the advantage of greater compactness and less load losses.
From an executing viewpoint, too, we have different solutions: in the former instance, we have the brass body protected by a chrome plating that facilitates its resistance to corrosion occasioned by environmental factors, besides improving the aesthetic appearance. In the latter instance, instead, manifolds for sanitary facilities are made in raw brass.
Another possible variant, too, is the wheelbase, ranging from 35 to 40 to ensure compactness in installations.


08/09/2016


See also
08/02/2016 Manifolds for sanitary installations with locking screw Moving from a forged, nickel-plated brass body, I can produce manifolds for sanitary installations.

08/03/2018 Manifolds for sanitary installations and flexible choice of derivations The modularity of the manifolds for sanitary installations allows to expand the number of derivations if necessary

08/07/2017 Manifolds for sanitary installations with adjustment screw Our manifolds for sanitary installations are made to give plenty of channels for fluid to pass through, resulting in reduced pressure drops.

08/01/2015 Some virtues of brass manifolds Why use brass manifolds in heating and which advantages do they have

08/07/2022 The manifolds: choice and benefits Why do you use a collector system? The use and choice of materials.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.