ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Heating collectors and principles of use

A combination of several heating collectors allows assemble a system of hydraulic management for residential areas

The evolution of hydraulic plant design provided for more and more marked reduction in the use of ground systems controlled by a set of  heating collectors, to the detriment of the old systems in which there were radiators made of aluminum, cast iron and fan-jet air, bulky, noisy and uneconomical, especially in institutions where it was necessary to heat rooms for a continuous period of considerable length.
Gnali Bocia, in the wake of the market for thermal plants in continuous development, has been dedicated to the design, maintenance and installation of heating systems of these types.
The management of heat flows, flow rates and temperatures in the game are the most important parameters for these applications that are observed by compound systems formed by heating collectors and other components.
Heating collectors comprise a rigid pipe generally made of brass and a set of outputs from which they advance tubes that carry water along the whole stretch of interest.
Generally, as regards the housing, each floor that uses these heating systems is constituted by a management system formed by at least a pair of  heating collectors: one for the flow coming from the boiler and reaching this component via the pumps, while the other concerns the output that collects the flow of "cold" and brings it back into the boiler where it is set to the operating temperature.
 

08/05/2013


See also
08/09/2017 Water collectors with diameters of 35 mm The 35-mm diameter makes the water collectors a valid solution in terms of compactness

08/08/2020 Water manifolds for the home The water manifolds serve to supply water throughout the house, in turn improving hot and cold water management.

08/03/2013 The use of water manifolds in heating installations Water manifolds are used in homes for all heated water sorting installations

08/03/2021 Heating manifolds with stopcock The adjustable version of heating manifolds useful for correctly balancing installations

08/12/2017 Use the manifolds for heating for better distribution With the manifolds for heating there is a better distribution and balancing of the heat in the system


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.