ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Flexible tubes in the hydraulic sector

Gnali Bocia manufactures and sells hydraulic components like flexible tubes.

Flexible tubes are one of many products exported by Gnali Bocia all over the world. Production is divided into flexible tubes for gas and for water and in both cases there are specific standards for the dual product types.
In order to guarantee fulfilment of the above-mentioned standards it is important that the flexible tubes comply with specific criteria in order to be sold freely on the market.
For flexible tubes that transport gas the standard referred to by Gnali Bocia is the UNI-CIG 8991; this established various criteria for the design, installation, commissioning, and maintenance of the domestic installations that use combustible gas. The above standard is applicable to the construction or repair of installations or part thereof, to the ventilation of premises and to the escape of combustion by-products. Therefore in order to guarantee high levels of quality, all of the flexible tubes for gas have to comply with this standard.
Flexible tubes that carry water or other incompressible fluids on the other hand are subject to the UNI-CIG 7129 standard, which is expressly applicable to installations of the type just described.
Flexible tubes for gas are covered with a yellow anti-corrosive and non-toxic sleeve, while those for water do not have this protection, although they do have to guarantee a minimum level of insulation from high temperatures.
 

01/05/2013


See also
01/10/2014 Marking non-extensible stainless steel flexible tubes. EN14800 legislation indicates how stainless steel flexible tubes should be marked.

01/02/2016 Flexible water tubes made of stainless steel Flexible water tubes, extendible and suitable for use with drinking water

01/09/2017 Flexible tubes for water, corrugated in steel Produced in corrugated stainless steel, the flexible tubes for water comply with the UNI CIG 7129 standard

01/12/2014 Stainless steel flexible tubes model FL286 Non-extensible stainless steel flexible tubes for connecting devices to the domestic network

01/07/2015 Various models of flexible rubber tubes, compatible to all gases On the catalogue, you'll be able to find the right range of flexible rubber tubes among a number of various measures' hanks


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.