ARCHIVE
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Electric resistors for heating as a multipurpose spare part

Electric resistors for heating fluids, built to be reliable spare parts

Using electric resistors to heat fluids in boilers is an old but still valid solution, especially for those applications where fuels are not permitted, or where the volumes in play are not large.
In Gnali Bocia’s reference catalogue, you can find electric resistors for heating that are suitable for any device, and the right power needed for its correct operation.
Remember that in order to work optimally, an electric resistor for heating must operate at a specific power that does not exceed 9 Watt/cm2, which is the reference parameter for the design of our devices.
The variety of connections available means you can use these electric resistors for heating in the majority of devices, even as a multipurpose spare part.
To make them last longer, these articles are made of 99.9% pure copper, and can be equipped with a magnesium sacrificial anode to protect them when immersed in particularly hard water.

03/08/2017


See also
03/01/2017 Seals between the parts of electric resistors A hermetic seal between the parts of an electric resistor guarantees safety

03/08/2017 Electrical armored resistors for heating Electrical resistors for heating are used also for fluids other than water

03/05/2017 Electric resistors for water heaters and the problem of system corrosion Electric resistors for water heaters made of pure copper to limit the effects of corrosion

03/08/2014 Flanged electric resistors for a safe system Care and precision in the construction of flanged resistors in order to ensure your safety

03/03/2017 The importance of the specific power of electric resistances Electric resistances made of pure copper to reduce the effects of corrosion and increase duration over time.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.