ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Air venting valves and accumulations in systems

Air accumulations in systems are caused by many things, but can be eliminated using an air venting valve

Why should you install an air venting valve?  The main reason is to eliminate the air and gas that accumulate in some areas of the system and which can prevent the fluid from flowing correctly through it.
Air pockets can appear as a result of many different causes, but the main ones are: incomplete expulsion of the air during the filling phase, gas dissolved in the filling or topping-up fluid, possible infiltrations during system operation. As said previously, the only way to remove them is to install air venting valves in suitable positions beforehand.
Air venting valves are also the only possible solution to bad system design, which accidentally allows the air to accumulate, above all near downward deviations.
Air venting valves can be automatic, eliminating gas without requiring external intervention, or manual like those normally installed on radiators, which need to be intervened on directly.

 

25/05/2017


See also
25/09/2017 Automatic air exhaust valve for plant performance Upstream to the boiler, the air exhaust valve serves to prevent dissolved gas from accumulating

25/10/2016 A safety valve avoids blocks in the system Discharging the air from a system through the safety valve in order to increase its thermal effectiveness

25/06/2015 Eliminating dissolved gases' bubbles with air vent valves The dissolved gases' bubbles that form with the increasing of temperature can be eliminated through the use of air vent valves

25/07/2013 Process of nickel plating on the air venting valve The nickel-plating is used to increase the material hardness and improve other characteristics of the air venting valves. This operation is executed before launching product to the market

25/08/2016 Use of air vent valves in solar panel systems Air vent valves both in a normal and a compact version for direct assembly on radiators


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.