ARCHIVE
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


High and low pressure regulators for the hydraulics industry High and low pressure regulators for the hydraulics industry
It has always been considered necessary to know the pressure values that a mechanical component is subject to during operation. This is the case for the pressure regulators that are differentiated by high and low pressures depending on the different scenarios under scrutiny.  Even if the design [...]
30/04/2014

Water manifolds for the home Water manifolds for the home
For many years now, Gnali Bocia has manufactured and sold multi way manifolds.  It is important that the water management distribution is assigned to the correct multi way system.  The speed at which the water flows through the outlet pipelines depends on the size of the pipes:  with outlet [...]
23/04/2014

The types of brass used for gas valves The types of brass used for gas valves
For all industries involved in the hydraulic connections and valves and fittings sector, the choice of brass is very important and can vary depending on the intended operating conditions. As it is an alloy that is made of copper and zinc and other alloys in smaller quantities, it is crucial to use [...]
16/04/2014

Gnali Bocia's range of products for thermal and hydraulic applications Gnali Bocia's range of products for thermal and hydraulic applications
Among the products for thermal and hydraulic applications designed and manufactured by Gnali Bocia include a wide range of items for both incompressible fluids (such as water and fluids with a high convective heat transfer coefficients) and compressible fluids (such as LPG, natural gas and [...]
09/04/2014

The importance of thermostats in boilers The importance of thermostats in boilers
A mechanical component must work at nominal conditions that allow continuity over time: for example, a thermostat for boilers must be able to detect the temperature or any variations of it with minimum reading errors so as to allow the boiler to control the flow of heat necessary for heating [...]
02/04/2014

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.